Exhaust Brake Switch - Ford TRADER Workshop Manual

EXHAUS.T CONTROLLED HEATING SYSTEM
F2
9TGOF2-155
Replacement
1. Disconnect the neutral switch connector at the upper part
of the transmission.
2. Remove the neutral switch.
3. Install in the reverse order of removal.
Tightening torque:
14-18 N·m (1.4-1.8 m-kg, 10-13 ft-Ib)
EXHAUST BRAKE SWITCH
Inspection
1. Remove the steering column cover.
2. Disconnect the exhaust brake switch connector.
3. Check continuity of the switch.
Exhaust brake switch Continuity
OFF No
ON
Yes
4. If not as specified, replace the switch. (Refer to Section T.)
F2-55