Bearing Housing; Gear Case - Ford TRADER Workshop Manual

M
WTYPE
WTYPE
(WITH STOPPER)
(WITHOUT STOPPER)
9TGOMX·170
YTYPE
'Gil""iil
9TGOMX·171
9TGOMX·172
MARKS
9iGOMX·173
M-38
DIFFERENTIAL
2. Install the washer and locknut onto the drive pinion.
3. Hold the flange with the SST and tighten the locknut to the
torque obtained in "drive pinion preload adjustment" in Step
3.
Pilot bearing outer race
1. Install the pilot bearing outer race into the carrier with the
SST.
2. Install the stopper plate into the carrier.
0N
type, with stopper)
Tightening torque:
19-26 N·m (1.95-2.60 m-kg, 14-19 ft-Ib)
Bearing housing
1. Install the adjustment shim(s), selected in "pinion height ad-
justment", and the bearing housing to the'carrier.
Tightening torque:
W type: 20-29 Nm (2.0-3.0 rn-kg, 14-22 ft-Ib)
Y type: 43-61 Nom (4.4-6.2 m-kg, 32-45 ft-Ib)
Gear case
1. Align the marks and assemble the gear case.
Tightening torque:
W type: 59-71 Nom (6.0-7.2 m-kg, 43-52 ft-Ib)
Y type: 64-74 N-m (6.5-7.5 m-kg, 47-54 ft-Ib)