Differential Gear Assembly; Side Bearing Outer Race - Ford TRADER Workshop Manual

M
9TGOMX·133
9TGOMX-137
M-30
DIFFERENTIAL
Disassembly Note
Differential gear assembly
1. Mount the differential gear assembly on the SST.
Bearing cap
1. Mark the bearing cap and the carrier for proper reassembly.
Adjusting screw
1. Mark the adjusting screw and the carrier for proper reas-
sembly.
Side bearing outer race
Note
.• Identify the left and right side bearing outer races
for proper reassembly.
1. Remove the side bearing outer races.
Locknut
1. Hold the companion flange with the SST,and remove the
locknut.
Companion flange
1 . Pull the companion flange off with the SST.
Bearing housing
1. Drive the bearing housing from the carrier by tapping the
drive pinion with a brass bar and a hammer.