Clutch Cover; Release Bearing - Ford TRADER Workshop Manual

CLUTCH UNIT, RELEASE BEARING, CLUTCH COVER, CLUTCH DISC
H
:SL ENGINE
49 Vl0l 060A
:HA ENGINE
IPI.,.i.,.eltl
9TGOHX·035
I,
'A9le1l'l.g'
TF ENGINE
i)
9TGOHX·036
9TGOHX·038
Clutch cover
1. Install the SST.
2. Align the dowel holes with the flywheel dowels.
3. Tighten the bolts evenly and gradually in a cross pattern.
Tightening torque:
18-26
N·m
(1.8-2.7
m-kg,
13-20
ft-Ib)
RELEASE BEARING
INSPECTION
Note
• The clutch release bearing is a sealed bearing and
must not be washed.
1. Turn the bearing while applying force in the axial direction.
If the bearing sticks or has excessive resistance, replace it.
CLUTCH COVER
INSPECTION
Note
• Minor scoring or burning should
be
removed with
emery paper.
1. Inspect the contact surface of the clutch disc for scoring,
cracks, and burning. Repair or replace as necessary.
2. Inspect the contact surface of the clutch release bearing
fqr wear and cracks.
If there is wear or cracks, replace the clutch cover.
CLUTCH DISC
INSPECTION
Note
• Use sandpaper if the trouble is minor.
1. Inspect the lining surface for burning and oil contamination.
Replace the clutch disc
if
it is badly burned or oil. soaked.
2. Inspect for loose facing rivets.
Replace the clutch disc if either is loose.
H-21