Lock Plate - Ford TRADER Workshop Manual

TOE CONTACT
C
- - - - ·
--
.-
-- ,1."."
HEEL CONTACT
DIFFERENTIAL
M
(1) Toe and flank contact
Replace the adjustment shim with a thinner one to move
the drive pini0r"! outward.
(2) Heel and face contact
Replace the adjustment shim with a thicker one to bring
the drive pinion in.
Lock plate
1. Tighten the bearing cap bolts to the specified torque.
Tightening torque:
W
type:
79-98
Nom
(8-10
m-kg,
58-72
ft-Ib)
V
type:
128-147
N-m
(13-15
m-kg,
94-108
ft-lb)
2. Install the lock plates on the bearing caps.
Tightening torque:
18-25 N-m (1.8-2.6 m-kg, 13-19 ft-Ib)
M-41