Steering Wheel - Ford TRADER Workshop Manual

u
REC-FRESH WIRE MODE WIRE
9TGOUX·02S
9TGOUX-Q27
U-14
FRONT HEATER
Removal note
Steering wheel
1. Remove the steering wheel with a steering wheel puller.
Heater control wire
1. Disconnect the REC-FRESH wire from the blower unit door
link.
2. Disconnect the MODE wire and MIX wire from the heater
unit door links.
Installation note
Heater control wire
Caution
• Connect the heater control wires to the correct po-
sition.
• Do not bend and twist the wires when installing.
• After installation, move the lever to be sure that the
wire is securely attached.
MODE wire
Adjustment
1. Set the MODE lever to DEF position.
9TGOUX·026
2. Set the MODE door link to DEF position as shown in the
figure, and connect the wire.
3. Clamp the wire.
Caution
• After installation, move the MODE lever to be sure
that it moves the full stroke from DEF to VENT.