Idle Speed - Ford TRADER Workshop Manual

:~~
-u
......
,
\~
........... \ _ -
,0filJj
cii!@---
trail
~
\
.
,
•
•
0
' 5 ":.:\
~:O
....
~. - =-
rptn
c .... _ _ .,.,.._
ENGINE TUNE-UP PROCEDURE
B
STGOB2-<l45
STGOB2·046
19. Install No.1 injection pipe.
20. Tighten injection pipes NO.2-4.
21. Install the bracket.
22. Install the accelerator cable to the control lever.
23. Install the fuel stop cable to the cut lever.
24. Install blind covers onto the clutch housing and the timing
gear case .
25. Bleed air from the system. (Refer to page B-16.)
26. Start the engine, and check for fuel leaks.
IDLE SPEED
Adjustment
1. Attach suitable reflector tape to the crankshaft pulley.
2. Run the engine at idle to normal operating temperature.
3. Turn
OFF
all electrical loads.
4. Confirm the free play of the accelerator cable.
Free play: 1-3mm (0.04-0.12 in)
5. Aim the light of the photo tachometer onto the reflecting tape
to measure the engine speed.
Idle speed HA : 600-650 rpm
SL Non-Turbo: 620-670 rpm
SL Turbo : 660-710 rpm
TF : 620-700 rpm
8-15