Left Engine Mount; Clutch Disc And Clutch Cover; Crankshaft Pulley - Ford TRADER Workshop Manual

B
9TGOB~·314
9TGOB2·315
9TGOB2·316
9TGOB2·317
49 V1 01 060A
49 W06S 062
9TGOB2·318
8-108
ASSEMBLY
Left Engine Mount
1. Install the left engine mount.
Tightening torque:
31-46 N·m (3.2-4.7 m-kg, 23-34 ft-Ib)
End Plate
1. Install the end pjate.
Tightening torque
HA: 32-47 N·m (3.3-4.8 m-kg, 24-35 ft-Ib)
. SL:
37-52
N·m
(3.3-5.3
m-kg,
27-38
ft-Ib)
Flywheel
1 . Apply clean engine oil to the bolt threads and seat faces.
2. Set the flywheel onto the crankshaft, and loosely install the
bolts.
3. Hold the flywheel with the SST.
4. Tighten the bolts in two or three steps in the order shown
in the figure.
Tightening torque
HA:
177-196
N-m
(18.0-20.0
m-kg,
130-145
ft-Ib)
SL:
206-226 N·m (21.0-23.0 m-kg, 152-166 ft-Ib)
Clutch Disc and Clutch Cover
1. Install the clutch disc and the clutch cover using the SST.
(Refer to Section H.)
Tightening torque:
18-26 N·m (1.8-2.7 m-kg, 13-20 ft-Ib)
Crankshaft Pulley
1. Apply clean engine oil to the bolt threads and seat faces.
2. Install the crankshaft pulley.
3. Hold the flywheel with the SST.
4. Install the washer and lock bolt.
Tightening torque:
343-392 N·m (35.0-40.0 m-kg, 253-289 ft-Ib)