Drive Belt - Ford TRADER Workshop Manual

..
;",
B
ENGINE TUNE-UP PROCEDURE
PULLEY
9TGOB2·011
HA ENGINE
WATER PUMP
t
CRANKSHAFT
9TFOBX-Q06
SL ENGINE
WATER PUMP
ALTERNATOR
t
CRANKSHAFT
TF ENGINE
IDLER (40A)
CRANKSHAFT
9TFOSX.()()7
8-8
DRIVE BELT
Inspection
1 . Remove the undercover for inspection of the
PIS
belt.
2. Check the drive belts for wear, cracks, and fraying. Replace
if necessary.
3. Verify that the drive belts are correctly mounted on the
pulleys.
4. Check the drive belt deflection by applying moderate pres-
sure (98'N, 10 kg, 221b) midway between the pulleys as
shown. Adjust if necessary.
Deflection
mm (in)
New
Used
HA
Alternator 9.0-10.0 (0.35-0.39)
10.0-11.0 (0.39-0.43)
PIS
9.0-11.0 (0.35-0.43)
12.0-13.0 (0.47-0.51)
SL
Alternator 9.0-10.0 (0.35-0.39) 10.0-11.0 (0.39-0.43)
PIS
9.0-11.0 (0.35-0.43) 12.0-13.0 (0.47-0.51)
TF
Alternator 10.0-11.0 (0.39-0.43) 11.0-12.0 (0.43-0.47)
5. Check the drive belt tension with the SST.
Tension
N (kg Ib) ,
New
Used
HA Alternator
294-392 245-294
(30-40, 66-88) (25-30,55-66)
SL
Alternator
392-491
343-392
(40-50,88-110) (35-40,77-88)
TF
Alternator
451-520
383-520
(46-53,101-117)
(39-53, 86-117)