Tightening Of Exhaust Manifold; Inspection And Adjustment Of Drive Belts - Ford TRADER Workshop Manual

SCHEDULED MAINTENANCE SERVICES
A
PULLEY
9TFOAX-008
HAENGINE
WATER
PUMP
CRANKSHAFT
9TGOB2·012
SL ENGINE
WATER
PUMP
ALTERNATOR
t
CRANKSHAFT
TF ENGINE
IDLER (40A)
CRANKSHAFT
TIGHTENING OF EXHAUST MANIFOLD
Tightening torque:
HA: 26-32 N·m (2.7-3.3 m-kg, 20-24 ft-Ib)
SL: 23-26 N-m (2.3-2.7 m-kg, 17-20 ft-Ib)
TF: 44-48 N·m (4.5-4.9 m-kg, 33-35 ft-Ib)
INSPECTION AND ADJUSTMENT OF DRIVE BELTS
Inspection
1. Remove the undercover for inspection of the PIS belt.
2. Check the drive belts for wear, cracks, and fraying. Replace
if necessary.
3. Verify that the drive belts are correctly mounted on the
pulleys.
4. Check the drive belt deflection by applying moderate pres-
sure
(98 N, 10 kg, 221b)
midway between the pulleys as
shown. Adjust if necessary.
Deflection
mm 0n)
New Used
HA
Alternator
9.0-10.0 (0.35-0.39) 10.0-11.0 (0.39-0.43)
PIS 9.0-11.0 (0.35-0.43) 12.0-13.0 (0.47-0.51)
Alternator
9.0-10.0 (0.35-0.39) 10.0-11.0 (0.39-0.43)
SL
PIS 9.0-11.0 (0.35-0.43) 12.0-13.0 (0.47-0.51)
TF
Alternator 10.0-11.0 (0.39-0.43)
11.0-12.0 (0.43-0.47)
A-9