Clutch Pedal Height - Ford TRADER Workshop Manual

WITH VACUUM POWER ASSIST
24-34 (2.4-3.5. 17-25)
EXCEPT VACUUM POWER ASSIST
o
12-17 (1.2-1.7.8.7-12)
DISENGAGEMENT
HEIGHT
PEDAL FREE
PLAY
PEDAL HEIGHT
N-m
(m-kg. ft-lb)
9TFOHX-003
CLUTCH PEDAL
CLUTCH PEDAL
ADJUSTMENT
Clutch Pedal Height
Inspection
H
1. Measure the distance from the upper surface of the pedal
pad to the floor panel.
Pedal height: 188-193mm (7.40-7.60 in)
2. If necessary. adjust the pedal height.
Adjustment
1. Disconnect the clutch switch connector.
2. Loosen locknuts A and turn clutch switch B until the height
is correct.
3. Tighten locknuts A.
Tightening torque:
9.8-14 N-m (100-140 cm-kg, 87-122 in-Ib)
4. After adjustment. measure the pedal free play.
Clutch Pedal Free Play
Inspection
1. Depress the clutch pedal by hand until resistance is felt.
Pedal free play: 0.5-2.7mm (0.02-0.11 in)
Total pedal free play: 5.0-11.0mm (0.20-0.43 in)
2. If necessary. adjust the pedal free play.
Adjustment
. 1. Loosen locknut C and turn push-rod 0 until pedal free play
is correct.
2. Verify that the disengagement height (from the upper sur-
face of the pedal to the floor panel) is correct when the pedal
is fully depressed.
Minimum disengagement height: 65mm (2.56 in)
3. Tighten locknut C.
Tightening torque:
With vacuum power assist
24-34 N·m (2.4-3.5 m-kg, 17-25 ft-Ib)
Except vacuum power assist
12-17 N-m (1.2-1.7 m-kg, 8.7-12 ft-Ib)
4. After adjustment, inspect the pedal height.
H-5