Brake Pipe - Ford TRADER Workshop Manual

~
!~
W
:u-
9TGOPX-oa1
BRAKE SYSTEM
Removal note
Brake drum
p
1. Remove the brake drum with the set screw tightened into
the hole
@,
if the drum is hard to remove.
Brake pipe
1. Remove the brake pipe with the SST.
Installation note
Brake shoe
1. Before installation, apply grease to the wheel cylinder and
anchor sliding parts (<=:», the projections of the backing plate
(").
.
2. Install the brake shoe.
Locknut
1. Loosely tighten the locknut to the hub spindle.
2.
Rotate the front hub
2-3
times to settle the bearing.
3. Measure the bearing preload. If necessary, tighten (or loos-
en) the locknut.
Bearing preload (Scale reading):
11-29 N (1.1-3.0 kg, 2.4-8.8 Ib)
4. Install the stop retainer.
Inspection
Brake drum
1. Measure the drum inner diameter.
Diameter limit: Refer to
.Section
TD
Caution
• H there are extremely uneven wear, grind (within the
limit) or replace the drum.
P-29