Steering Lock Assembly; Steering Shaft - Ford TRADER Workshop Manual

N
MANUAL STEERING
9TGONX-Q25
TILT CABIN
d3
~.I!--.
STANDARD CABIN
~--rlj""! --j~.i
- _
9TGONX·027
9TGONX-Q28
9TGONX·029
N-14
Disassembly note
Steering lock assembly
1. Use a chisel to make a groove in the heads of the steering
lock mounting bolts. Remove the bolts with a screwdriver.
2.
Remove the steering lock assembly.
Inspection
Steering shaft
1. Column bearing damage.
2. Operation and damage of steering shaft and joint.
Steering lock assembly (3.5 L TURBO and 4.0 L Engine
type)
1.
Verify that the cable connector moves only as shown in the
figure when the key is in the LOCK and ACC position.
Assembly note
Steering lock assembly
1. Install the steering lock assembly on the jacket. Install new
steering lock mounting bolts. Tighten the bolts until the heads
break off. .