Injection Nozzle - Ford TRADER Workshop Manual

INJECTION NOZZLE
Removal
Warning
FUEL SYSTEM
• Keep sparks, cigarettes, and open flames away from the fuel area.
1 . Remove the negative battery cable.
2. Remove in the order shown in the figure.
1. Injection pipe
2. Return pipe
3. Injection nozzle
Inspection
F1
Nom (m-kg. ft-lb)
9TGOF1 -C>4S
Warning
• Do not allow your hands or any other part of the body to come into the direct path of the spray
when using the nozzle tester because the spray has enough force to break the skin and ·possi-
bly cause blood poisoning.
Caution
• The nozzle tester should be set up in a clean work place.
9TGOF1·046
Injection starting pressure
1. Connect the nozzle to a nozzle tester.
2. Pump the nozzle tester handle and note the pressure when
injection is started.
Injection starting pressure:
13,244-13,734 kPa
(135-140 kg/cm
2
,
1,920-1,991 psi)
F1-19