Removal F Installation - Ford TRADER Workshop Manual

RADIATOR
E
RADIATOR
REMOVAL
I
INSTALLATION
Caution
• Position the hose clamp in the original location on the hose, and squeeze the clamp lightly
with large pliers to ensure a good fit.
• After radiator cowling installation, rotate the cooling fan by hand and verify that the fan blade
does not touch the radiator cowling.
It the fan touches the cowling, adjust the radiator cowling mounting position.
1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove the undercover.
4. Remove in the order shown in the figure.
5. Install in the reverse order of removal.
Steps After Installation
1. Install the undercover.
2. Fill the radiator with the specified amount and type of engine coolant. (Refer to page E-7.)
3. Connect the negative battery cable. .
4.
Start the engine and check for leaks.
CD
TURBO
CHECK THE RADIATOR FOR FOLLOWING
• CRACKS, DAMAGE, AND WATER LEAKAGE
• BENT FINS (REPAIR WITH A SCREWDRIVER)
N-m
(m-kg, ft.Ib)
9TFOEX.()()8
1. Intercooler 4. Cooling fan drive belt
Service ......................................... Sectiol1 F2
Adjustment .................................... Section B
2. Radiator hose 5. Cooling fan
3. Radiator cowling 6. Radiator
E-9