J1
9TGOJ1-QSS
9TGOJ1-059
J1-28
TRANSMISSION
Disassembly Note
Roll pin
1. Remove the roll pins with a pin punch.
Interlock pin
1. Remove the interlock pin with a magnet.
Roll pin
1. Align the groove, then remove the roll pin with a pin punch.
INSPECTION
Inspect all parts and repair or replace as necessary.
Each gear and main drive .gear
1. Inspect synchronizer cones for wear.
2. Inspect individual gear teeth for damage, wear, and cracks.
3. Inspect synchronizer ring matching teeth for damage and
wear.
4. Inspect main drive gear splines for damage and wear.
Mainshaft
1. Measure the mainshaft runout.
Runout: 0.035mm (0.0014 in) max.
2. Inspect splines for damage and wear.