Trail Control; What Is Trail Control; Trail Control Limitations; Switching Trail Control On And Off - Ford SUPER DUTY 2024 Owner's Manual

WHAT IS TRAIL CONTROL

WARNING: The system does not
control speed in low traction conditions
or extremely steep slopes. The system
is designed to be an aid and does not
relieve you of your responsibility to drive
with due care and attention. Failure to
follow this instruction could result in
personal injury.
WARNING: The system does not
replace the parking brake. When you
leave your vehicle, always apply the
parking brake.
Trail control lets you focus on steering
during low-speed and off-road use by
controlling your vehicle's acceleration and
braking to maintain the speed that you set.
You may hear a noise from the anti-lock
brake system pump motor when you use
the system. This is normal.

TRAIL CONTROL LIMITATIONS

Trail control is unavailable when any of the
following occur:
• Your vehicle speed is greater than
20 mph (32 km/h) in two-wheel drive
high (2H) or four-wheel drive high (4H)
modes.
• Your vehicle speed is greater than
9 mph (15 km/h) in four-wheel drive
low (4L) mode.
• Your vehicle speed is greater than
5 mph (8 km/h) in reverse (R).
• The transmission is in park (P).
• The driver side door is open or your
seatbelt is off when the driver side door
is removed.
• Cruise control is on.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM

Trail Control

270
(If Equipped)
• Pro trailer backup assist is on.
• The parking brake is applied.
SWITCHING TRAIL CONTROL
ON AND OFF
Press the button.
E272858
The system switches off if you press the
button again or exceed 42 mph (68 km/h).
SETTING THE TRAIL CONTROL
SPEED
Note: The buttons are located on the
steering wheel.
Drive to your preferred speed.
Press button to increase the set
current speed.
E246884
Press button to decrease the set
current speed.
E246885
Note: The indicator changes color.
You can adjust the set speed in small or
large increments. Press the toggle button
upward or downward once to adjust the
set speed in small increments. Press and
hold the toggle button upward or
downward to adjust the set speed in large
increments.
You can also decrease the set speed by
braking.
Note: If a set speed is set and the trail
control is active and the vehicle is stopped
by the brake, releasing the brake will allow
the vehicle to accelerate to the set speed.
Pressing the brake pedal does not switch
off the system.