Injection Nozzle - Ford TRADER Workshop Manual

FUEL SYSTEM
F2
INJECTION NOZZLE
Removal
Warning
• Keep sparks, cigarettes, and open flames away from the fuel area.
1 . Remove the negative battery cable.
2. Remove in the order shown in the figure.
1. Injection pipe
2. Nozzle holder bracket
Inspection
Warning
Nom (in-kg, ft..Jb)
9TGOF2.()97
3. Fuel return hose
4. Injection nozzle
• Do not allow your hands or any other part of the body to come into the direct path of the fuel
spray when using the nozzle tester because the spray has enough force to break the skin and
possibly cause blood poisoning.
Caution
• The nozzle tester should
be
set up in a clean work place.
9TGOF2.()99
9TGOF2-098
Injection starting pressure
1. Connect the nozzle to a nozzle tester.
2. Pump the nozzle tester handle and note the pressure when
injection is started.
Injection starting pressure
New nozzle : 17,168 kPa (175 kglcm
2
,
2,489 psi)
Used nozzle: 16,677 kPa (170 kg/cm
2
,
2,417 psi)
F2-37