Table of Contents
Advertisement
E
COOLING FAN
REMOVAL
I INSTALLATION
caution
COOLING FAN
INSPECTION
1. Inspect for the follwing. Replace if necessary.
(1) Fluid leakage from the fan drive.
(2) Deformation of the bimetal.
(3) Cracks and damage of the fan blade.
2. Warm up the engine and stop it.
3. With the engine stopped, turn the fan by hand and verify
that resistance felt. .
4. Replace the fan drive if necessary.
• After radiator cowling installation, rotate the cooling fan by hand and verify that the fan blade
does not touch the radiator cowling.
If the fan touches the cowling, adjust the radiator cowling mounting position.
1 . Disconnect the negative battery cable.
2. Remove in the order shown in the figure.
3. Install in the reverse order of removal.
Steps After Installation
1 . Connect the negative battery cable.
@
N-m
(m-kg,
ft-lb)
9TFOEX-011
1. Radiator cowling
3. Water pump pulley
2. Cooling fan drive belt
4. Fan drive
Adjustment .................................... Section B
5. Fan blade
E-12
Advertisement
Table of Contents
Troubleshooting
