Inspection Of Kingpin Oil; Lubrication Of Front Wheel Bearings; Inspection Of Wheel Lug Unit - Ford TRADER Workshop Manual

SCHEDULED MAINTENANCE SERV'ICES
A
STFOAX-Q17
STQOAX-130
INSPECTION OF KINGPIN OIL
Check the kingpin oil level on the gauge.
The level should be between the "MAX" and "MIN" level.
LUBRICATION OF FRONT WHEEL BEARINGS
1. Remove the hub and inner and outer bearing.
Clean with solvent and inspect the bearings for damage.
2. Repack lithium grease (NLGI No.2) to the following parts.
1) All rolling surfaces of the bearings
2) Between the bearing and oil seal.
3) Between the bearings in the hub
3. Apply lithium grease (NLGI No.2) to the oil seal lip (use new
oil seals).
LUBRICATION OF PROPELLER SHAFT JOINTS
Lubricate each part with the specified grease through the
nipples.
Nipples .... Grease
@ ........
NLGI No.2
@ .•.•....
Disulphide molybdenum grease
INSPECTION OF WHEEL LUG NUT
Check the tightening torque.
Tightening torque:
~
Single rear tire
Item'
N-m (m-kg, ft-Ib)
Front
167-215
Rear
(17-22, 123-159)
Dual rear tires
N-m (m-kg, ft-lb)
491-735
(50-75.362-542)
Inside
540-784
(55-80.398-578)
Outside
491-735
(50-75.362-542)
TIGHTENING BOLTS AND NUTS ON CHASSIS AND
BODY
Retighten any loose nuts and bolts on chassis and body to
the specified torque.
A-27