Brake Shoe - Ford TRADER Workshop Manual

p
P-30
BRAKE SYSTEM
2. Check the contact of drum and lining.
Apply chalk to the inside of the drum and rub the shoe
against the drum.
Note: Check for extremely poor contact.
caution
• If there are extremely uneven wear, grind (within the
limit) or replace the drum.
• After the check, wipe off the chalk.
Brake shoe
1. Inspect for peeling, cracks, or abnormal wear of the lining.
If necessary, replace the brake shoe.
2. Measure thickness of the lining. If thickness is less than
specified, replace the brake shoe.
Lining thickness: 1.0mm (0.04 in) min.