Woodruff Key - Ford TRADER Workshop Manual

ENGINE SPEED SENSING POWER STEERING
N
STGONX·109
STGONX·110
STGONX·112
Oil seal
1 . Secure the front body in a vise.
2. Remove the oil seal with a screwdriver.
Caution
• Do not damage the front body and the needle
bearing.
Assembly note
Woodruff key
1. Tap the Woodruff key into the shaft.
Caution
• Not to damage the shaft, use a rag under the shaft
for protection.
Driveshaft
1. Press the bearing on as shown.
2. Install the snap ring.
Front body
1. Press the oil seal in as shown.
2. Press the driveshaft and the bearing in as shown.
3. Install the snap ring.
N-41