Oil Filter, Oil Bypass Filter; Replacement - Ford TRADER Workshop Manual

D
0-8
OIL FILTER, OIL BYPASS FILTER
OIL FILTER
REPLACEMENT
1. Remove the oil filter with a suitable wrench.
2. Use a clean rag to wipe off the mounting surface on the
engine.
3. Apply a small amount of clean engine oil to the rubber seal
of the new filter.
4. Install the oil filter and tighten it by hand until the rubber
seal contacts the base.
5. Tighten the filter 1/2 turn with a filter wrench.
6. Start the engine and c.heck for leaks.
7. Check the oil level and add oil
if
necessary.
Oil filter capacity: 1.0 liter (1.06 US
qt,
0.88 Imp
qt)
OIL BYPASS FILTER
REPLACEMENT
1. Remove the oil bypass filter with a suitable wrench.
2. Use a clean rag to wipe off the mounting surface on the
engine.
3. Apply a small amount of clean engine oil to the rubber seal
of the new filter.
4. Install the oil bypass filter and tighten it by hand.
5. Start the engine and check for leaks.
6. Check the oil level and add oil if necessary.
Oil bypass filter capacity:
0.6 liter (0.63 US qt, 0.53 Imp qt)