Table of Contents
Advertisement
9TGOMX·021
9TGOMX.()24
9TGOMX'()25
FRONT AXLE
Hub bolt
Caution
• Do not remove the hub bolt if not necessary.
• Do not reuse a removed hub bolt.
1. Remove the hub bolts with a brass hammer.
Assembly Note
Hub bolt
1. Install the hub bolts with a brass hammer.
Bearing outer race
M
1. Install the bearing outer race wtth a brass bar and a hammer.
Oil seal
1. Apply grease around the new oil seal lip.
2. Drive the oil seal into the wheel hub with a suitable plate
and a hammer.
3. Pack grease into the shaded areas shown in the figure.
M-9
Advertisement
Table of Contents
Troubleshooting
