Printing The Configuration Page; Updating The Firmware - Ricoh SP 203S Operating Instructions Manual

Printer tab
• Configure how the machine behaves when its paper size and/or type settings do not match
those of the printer driver.
• Specify the period of time the machine waits if it fails to receive a print job.
Copy tab
• Configure toner-saving settings.
• Configure scaling settings.
• You can specify the bypass tray paper size and/or type.

Printing the Configuration Page

• When printing the test page, set the paper size to A4 or Letter. When printing other reports, set the
paper size to A4, Letter, or Legal.
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP xxx Series].
3. Click [Smart Organizing Monitor for SP xxx Series Status].
4. If the machine you are using is not selected, click [Select Device...], and then select the
machine's model.
5. Click [OK].
6. On the [User Tool] tab, select [Test Page] or [Configuration Page] in the [List / Test:] list.
7. Click [Print].

Updating the Firmware

• In no event shall the company be held liable to customers for damages of any kind resulting from
use or loss of use of this software.
• The company shall also not be held liable for any disputes between the customer and third parties
resulting from any use or loss of use of this software.
• To make sure that a firmware update has successfully completed, print the configuration page
before and after the update.
• Make sure to never disconnect the USB cable during a firmware update.
• Disconnect any unnecessary cables from the machine when running a firmware update.
Using Smart Organizing Monitor
53