Table of Contents
Advertisement
Important:
The 201i server is shipped ready for installation into an Option 11C or Option 11C Mini switch
or Communication Server 1000 system. Before you install the 201i server in a larger
Meridian 1 switch (for example, Option 51C), you must move the secondary backplane
(DS30X) connector to the correct position. For more information, see
secondary backplane connector
The following diagram shows the 201i server components:.
Faceplate
The following diagram shows the 201i server faceplate. The faceplate provides LEDs, MPC
card slots, and connectors for peripheral devices:
®
Avaya CallPilot
201i Server Hardware Installation
on page 39.
Faceplate
Repositioning the
December 2010
15
Advertisement
Table of Contents
