003-973 Image Rotation Rap; 003-974 Next Original Specification Rap - Xerox workcentre 5335 series Service Manual

003-973 Image Rotation RAP

The document and the image are different in orientation (except when Poster is specified).
When rotation is not available even though the orientation of the document and the image are
different and part of the image will be lost if it is not rotated.
Procedure
• Ask customer to verify the image loss and use a larger paper size if available. Or use
reduction to make a smaller document and repeat the operation.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - reload Software
Status Indicator RAPs
003-973, 003-974

003-974 Next Original Specification RAP

Next document specified. Scanning is complete for all loaded documents.
Procedure
• Ask customer to verify that scanning is complete or other documents should be loaded.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - reload Software
(GP 16)
07/2011
2-58
BUS Updated 12/2011
(GP 16)
Initial Issue
WorkCentre 5335 Family Service Documentation