013-220 Folder Detect Fail Rap (Lx); 013-306 Booklet Safety Switches Open Rap (Lx) - Xerox workcentre 5335 series Service Manual

013-220 Folder Detect Fail RAP (LX)

BSD-ON: BSD 12.17 - Office Finisher LX Folding
Control logic cannot detect the Folder Assembly.
Procedure
Execute Component Control [013-160], Folder Detected. The display is 'Low.'
Y N
There is less than 1 VDC at P/J8990
Y N
Check the wires between P/J8990
fastened.
Replace the Finisher PWB (PL 23.16).
Go to BSD 12.17 - Office Finisher LX Folding
Initial Issue
WorkCentre 5335 Family Service Documentation
pin 4.
pins 4 and 5. Make sure that P/J8903 is securely
and check for an intermittent circuit.
BUS Updated 12/2011

013-306 Booklet Safety Switches Open RAP (LX)

BSD-ON: BSD 12.13 - Office Finisher LX Booklet Interlock Switching
Control logic senses that one or more Booklet Safety Switch is open.
Initial Actions
Check for 013-307 Faults.
Procedure
There is +24 VDC between P/J8993
Y N
There is +24 VDC between P/J8993
Y N
Go to the 013-307 RAP
GO to BSD 12.13 - Office Finisher LX Booklet Interlock Switching
cuit through the Booklet Safety Switches
Replace the Booklet PWB (PL 23.21).
07/2011
2-139
pin 3 on the Booklet PWB and GND.
pin 6 on the Booklet PWB and GND.
and check the cir-
(PL 23.21).
Status Indicator RAPs
013-220, 013-306