005-132 Dadf Invert Sensor On Jam Rap; 005-134 Dadf Inverter Sensor Off Jam (During Invert) Rap - Xerox workcentre 5335 series Service Manual

Table of Contents

Advertisement

005-132 DADF Invert Sensor On Jam RAP

BSD-ON:
BSD 5.6 - Document Scan and Invert
After the Read Speed Control operation started (DADF Registration Motor On (CCW)), the
DADF Invert Sensor did not turn ON within the specified time.
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
Transportation failure due to foreign substance in the document path
The surface of the roll for foreign substance
The surface of the roll for wear
Check the sw version of the controller sw - update if required.
DADF Registration Motor:
Component Control
Check the circuit between the DADF Inverter Sensor and the DADF PWB
DADF Invert Sensor:
Component Control
DADF PWB failure.
(PL
51.2)
Initial Issue
WorkCentre 5335 Family Service Documentation
[005-033]
(PL
51.5)
[005-211]
(PL
51.9)
BUS Updated 12/2011

005-134 DADF Inverter Sensor Off Jam (During Invert) RAP

BSD-ON:
BSD 5.6 - Document Scan and Invert
After the DADF Registration Sensor turned OFF at Invert of the last document, the DADF
Inverter Sensor did not turn OFF within the specified time.
During the Invert where there is a next document, after the Read Speed Control operation
started (DADF Registration Motor On (CCW)), the DADF Inverter Sensor did not turn OFF
within the specified time.
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
Transportation failure due to foreign substance in the document path
The surface of the roll for foreign substance
The surface of the roll for wear
Check the sw version of the controller sw - update if required.
DADF Registration Motor:
Component Control
Check the circuit between the DADF Registration Sensor and the DADF PWB
Check the circuit between the DADF Inverter Sensor and the DADF PWB
DADF Registration Sensor:
Component Control
DADF Invert Sensor:
Component Control
DADF PWB failure.
(PL
51.2)
07/2011
2-67
[005-033]
(PL
51.5)
[005-110]
(PL
51.17)
[005-211]
(PL
51.9)
Status Indicator RAPs
005-132, 005-134

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5335 series

Table of Contents