005-194 Size Mismatch Jam On Ss Mix-Size Rap; 005-196 Size Mismatch Jam On No Mix-Size Rap - Xerox workcentre 5335 series Service Manual

Table of Contents

Advertisement

005-194 Size Mismatch Jam On SS Mix-Size RAP

BSD-ON:
BSD 5.3 Document Size Sensing (2 of 2)
In Slow Scan (SS) Mixed mode, it was detected that the size in the Fast Scan Direction was
different from the width of the document guide.
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
Check that the DADF Tray Set Guide operates normally.
Check the circuit between the DADF Tray Set Guide Sensors 1-3 and the DADF PWB
DADF Tray Set Guide Sensors 1-3:
Component Control
Initial Issue
WorkCentre 5335 Family Service Documentation

005-196 Size Mismatch Jam On No Mix-Size RAP

BSD-ON:
BSD-ON:
BSD-ON:
A document in a different size from the first document was detected in the No Mix mode.
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
[005-215/216/217]
(PL
51.10)
07/2011
2-71
BUS Updated 12/2011
BSD 5.2 - Document Size Sensing (1 of 2)
BSD 5.3 Document Size Sensing (2 of 2)
BSD 5.4 - Document Feed (1 of 2)
DADF Tray Set Guide Sensors 1-3:
Component Control
DADF APS Sensor 1:
Component Control
Document Tray Size Sensor 1/2:
Component Control
Check the sw version of the controller sw - update if required
If no problems are found, replace the DADF PWB
[005-215/216/217]
(PL
51.10)
[005-218]
(PL
51.17)
[005-221/222]
(PL
51.10)
(GP
16).
(PL
51.2).
Status Indicator RAPs
005-194, 005-196

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5335 series

Table of Contents