005-940 Dadf No Original Rap; 005-941 Doc Number Of Sheets Of Insufficient Rap - Xerox workcentre 5335 series Service Manual

005-940 DADF No Original RAP

Operation Fail. Final document correction notification due to DADF document being pulled out.
Procedure
• Reload the document.
• Change the system data 700-530 to "0" and disable the automatic startup boot operation
at System Fail (make sure to reset to 1 when complete
• Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
005-941 Doc Number of Sheets is Insufficient RAP
Operation Fail. Though all documents/N documents reloaded, the machine detected one or
more documents were missing. Whether all documents or N documents are reloaded, the
machine detects one or more documents are missing while skipping scanned documents (i.e.
feeding them without scanning them). If a failure occurs before the machine finishes scanning
documents and outputs them, the machine skips scanned documents even if it instructs the
user to reload N documents.
Procedure
• As the number of documents is insufficient, reload a proper number of documents.
• Change the system data 700-530 to "0" and disable the automatic startup boot operation
at System Fail (make sure to reset to 1 when complete
• Check the sw version of the controller sw - update if required
07/2011
2-79
BUS Updated 12/2011
Status Indicator RAPs
005-940, 005-941