Rep 12.3 Sub Paddle Solenoid - Xerox VersaLink B7025 Service Manual

REP 12.3 Sub Paddle Solenoid

Parts List on PL 12.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Remove the front inner cover, PL 12.05 Item
3. Turn over the integrated office finisher.
4. Remove the bottom cover, PL 12.06 Item
5. Disconnect the connector, Figure 1:
a. Release the harness from the three clamps (1).
b. Disconnect the connector (2).
Figure 1 Connector
6. Turn over the integrated office finisher.
7. Remove the sub paddle solenoid assembly,
a. Disconnect the connector (1).
b. Release the harness from the retainers (2).
c. Remove two screws (3).
d. Remove the sub paddle solenoid assembly (4).
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 12.1.
6.
1.
Figure 2:
Figure 2 Sub paddle solenoid assembly removal
8. Remove the support, Figure
a. Remove the screw (1).
b. Remove the support (2).
April 2017
4-59
3:
Figure 3 Support removal
Repairs and Adjustments
REP 12.3