Limit Switch Adjustment; Fully Closed Position Adjustment - Honda Civic 2002-2003 Service Manual

Moonroof
Limit Switch Adjustment
1. Remove the headliner (see page 20-5~).
Fully closed position adjustment
2. With the moonroof wrench, close the glass (A) fully:
• Make sure both link lifters (B) are parallel, and in the position shown.
• Check the glass fit to the roof panel and the glass height (see page 20-37).
C
5 xO.8 mm
5 N·m 10.5 kgl·m, 4lbl·fti
3. With an open-end wrench, loosen the limit switch mounting bolts (C).
4. Adjust the limit switch (D):
• Move the switch plate (E) a little at a time, then secure it
atthe
position where you hear a faint click when the
switch cam (F) pushes the position switch (open/ciose).
• Check that the switch piate contacts the switch bracket (G).
20-46