Honda Civic 2002-2003 Service Manual page 687

•
14, With a sponge, apply a light coat of body primer to
the original adhesive remaining around the quarter
glass opening flange, Let the body primer dry for at
least 10 minutes:
• Do not apply glass primer to the body, and be
careful not to mix up glass and body primer
sponges,
Never touch the primed surfaces with your hands,
: Apply body primer here.
20mm
10,79 in,1
20mm
(0,79 in,1
15, Before filling a cartridge, cut a "V" in the end ofthe
nozzle (A) as shown,
10 mm (0.39 in.)
/
A
~.,..,
7 mm (0.27 in.)
16, Pack adhesive into the cartridge without air pockets
to ensure continuous delivery. Put the cartridge in a
caulking gun, and run a bead of adhesive (A)
around the edge of the rubber dam (B) as shown,
With the glass primer
(e)
you applied in step 13 on
the quarter glass (D) as a guide, apply the adhesive
to the upper and lower corner portions of the
quarter glass, Apply the adhesive within 30
minutes after applying the glass primer. Make a
slightly thicker bead at each corner.
10mm
(0,39in,1
:~
7mm
(0,28 in,1
A B
~
iiiiOii~~~
_l,
~------~
,
A
o
A
A
InSi~e
'
~'
2mm
(0,08 in,1
~
' ' ' '
/ 0
InSid.~
!
B
o
(conl'd)
20-33