Honda Civic 2002-2003 Service Manual page 458

Manual Transmission
Transmission Reassembly (cont'd)
9. Install the 14 x 20 mm dowel pins (A).
D---~=
34N·m
13.5 kgl·m,
25 fbl·ltl
~~~~W~')
10. Set the tapered cone ring (B) as shown. Place the
transmission housing
overthe
clutch housing,
being careful to line up the shafts.
13-48
11. Lower the transmission housing the rest of the way
as you expand the 72 mm snap ring (C). Release
the snap ring so it seats in the groove of the
countershaft bearing.
12. Check that the 52 mm snap ring is securely seated
in the groove of the countershaft bearing.
Dimension
CD
as installed: 3.3-6.0 mm
(0.13-0.24 in.)
13. Apply liquid gasket
!PIN
08718-0001) to the threads
of the 32 mm sealing cap (D), and install it on the
transmission housing.
14. Install the transmission hangers A, and B, and the
8 mm flange bolts finger-tight.
15. Tighten the 8 mm flange bolts in a crisscross
pattern in several steps.
a
-,-~,.J
8x 1.25mrn
27N·m
12.8 kgl.m,
20 fbl·lt)