Emblem Replacement - Honda Civic 2002-2003 Service Manual

Exterior Trim
Emblem Replacement
NOTE: When removing the emblem, take care not to scratch the body.
1. To remove the front "H" emblem and front type emblem, remove the front bumper (see page 20-85).
2. Clean the bonding surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from
getting on the surface.
3. Apply the emblem, where shown .
• When installing the side i-VTEC emblem on the body, align the application tape with the edge of the wheel arch,
then press the emblem into place, and remove the application tape.
'03 model: When installing the LEV emblem on the quarter glass, align the application tape with the edge of the
black ceramic and alignment mark on the quarter glass, then press the emblem into place, and remove the
application tape.
20-100
- - ----------
__
'-=-c:""-~-
FRONT "H" EMBLEM BASE
FRONT "H" EMBLEM
FRONT Si EMBLEM PLATE
FRONT Si PUSH NUT
EMBLEM
\
-~ ~§~
-~~~
..
~~/
6!!5~
,~,~,,~ ~--'
PUSH NUTS FRONT GRILLE
FRONT SiR
EMBLEM
PINS
FRONT TYPE EMBLEM
FRONT "H" EMBLEM
PUSH NUTS
---
---'"::-'--
FRONT GRILLE