Manual Transmission
Countershaft Reassembly (cont'd)
17. Support ball bearing (A) on steel blocks (8), then
use a press (C) and an attachment (D) to press the
counters haft (E) out of the ball bearing.
18. If necessary, install the 35 mm shim selected in
step 16, then recheck the clearance.
19. Install the distance collar (AI. 35 mm shim, and new
ball bearing (8) using the special tools and a press
(C).
c
13-38
20. Tighten the new special bolt (A) (left-hand threads).