Honda Civic 2002-2003 Service Manual page 1013

,
J
.
9. Remove the B-pillar upper trim (see page 20-501
10. Remove the shoulder anchor adjuster(AI.
8x1.25mm
22 N·m 12.2 kgf·m, '6Ibf·ftl
11. Install the seat belt in the reverse order of removal,
and note these items:
o
If the threads on the retractor mounting self-
tapping
ET
screw are worn out, use an oversized
self-tapping ET screw (PIN 90133-SZ4-00301
made specifically for this application.
Check that the retractor locking mechanism
functions (see page 23-91.
Assemble the washers, collars, and bushing on
the upper and lower anchor bolts as shown.
If the seat belt tensioner has been deployed
replace the front seat belt protector with a new
one.
o
Apply liquid thread lock to the anchor bolts
before reinstallation.
o
Before installing the anchor bolts, make sure
there are no twists or kinks in the front seat belt.
Make sure the seat belt tensioner connector is
plugged in properly.
Reconnect the negative cable to the battery.
Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
Reset the clock.
Do the ECM/PCM idle learn procedure (see page
11-1391.
Upper anchor bolt construction:
UPPER ANCHOR COLLAR
\
BUSHING
I
~ij
/
TOOTHED
LOCK WASHER
Lower anchor bolt construction:
WAVE WASHER
~
--j'
~)!~,i(~1
/
/
..
~.
LOWER ANCHOR
LOWER ANCHOR BOLT
BUSHING
\
WASHER
COt
LAR
/ COr
R
~I:
Ii
-J .'
J®§)
SPRING WASHER
I
TOOTHED LOCK WASHER
(conl'dl
23-5