Honda Civic 2002-2003 Service Manual page 675

•
•
•
13. Glue the side rubber dams IAI and lower rubber
dam IBI with adhesive tape INITIO 501 M, or
equivalentl. Glue the fasteners lei with adhesive
tape 13M 4215, or equivalentl to the inside face of
the windshield IDI as shown:
• Be sure the rubber dams and fasteners line up
with the alignment marks IE).
• Be careful not to touch the windshield where
adhesive will be applied.
12.5 mm
(0.49 in.1
E
~---,
E
B~'
12.5 mm - --<-"' "
(0.49 in.1
A
12.5
mm
(0.49 in.1
==
14. Glue the molding IA) with adhesive tape IB)
13M 4212, or equivalent) to the upper edge of the
windshield Ie):
• Be sure the alignment mark ID) of the molding
lines up with the alignment mark IE) of the
windshield.
• Be careful not to touch the windshield where
adhesive will be applied.
D A
E
B
15. Install the fasteners IA), retainers IB, e), and clips
ID) to the body.
Fastener Locations
A
l> :
Fastener,
2 B
[> :
Retainer, 2
c
[>:
Retainer, 6
D[>: Clip, 2
~
Iconl'd)
20-21