Honda Civic 2002-2003 Service Manual page 1080

J
,
11. Check resistance between the No.2 terminal of the
floor wire harness 3P connector and body ground.
There should be an open circuit, or at least 1 M Q.
FLOOR WIRE HARNESS 3P CONNECTOR
Wire side of female terminals
Is the resistance as specified?
YES-Go to step 12.
NO-Short to ground in the floor wire harness or
multiplex control unit. Replace the faulty harness or
part .•
12. Check resistance between the No.3 terminal of the
floor wire harness 3P connector and body ground.
There should be an open circuit, or at least 1 M
Q.
FLOOR WIRE HARNESS 3P CONNECTOR
=
Wire side of female terminals
Is the resistance
as
specified?
YES-Go to step 13.
NO-Short to ground in the floor wire harness;
replace the floor wire harness .•
13. Check resistance between the No.8 terminal of
SRS unit connector C (8P) and the No.3 terminal of
the floor wire harness 3P connector. There should
beO-1
Q.
FLOOR WIRE HARNESS SRS UNIT CONNECTOR C IBPI
3P CONNECTOR
1 2 3 4
5 6 7 8
LTGRN
'---------(Q)------:-::-::-::'
LTGRN
Wire side of female terminals
Is the resistance as specified?
YES-Go to step 14.
NO-Open in the floor wire harness; replace the
floor wire harness .•
14. Check resistance between the No.4 terminal of
SRS unit connector C (8P) and the No.2 terminal of
the floor wire harness 3P connector. There should
beO-1
Q.
FLOOR WIRE HARNESS
3P CONNECTOR
SRS UNIT CONNECTOR C IBP)
BLU/RED
1 2 3
5 6 7 8
Wire side of female terminals
Is the resistance as specified?
YES- Replace the SRS unit (see page 23-122) .•
NO-Open in the floor wire harness or multiplex
control unit, or poor connection at the floor wire
harness, the under-dash fuselrelay box, and the
multiplex control unit. Check the connection at the
floor wire harness, the under-dash fuse/relay box,
and the multiplex control unit. If the connection is
OK, replace the faulty harness or part .•
23-73