•
4. Remove the bolts (A) and screws (8) securing the
dashboard
(e)
and steering hanger beam (D), and
disconnect the power mirror switch connector (E)
and cruise control main switch connector (F).
Separate the dashboard and steering hanger beam.
Fastener Locations
A~:
Bolt, 4
B
~:
Screw, 9
F
E
5xO.8mm
5 N·m (0.5 kgf·m, 4 IbMt)
5. Install the beam in the reverse order of removal,
and note these items:
Make sure the dashboard wire harness (G) is not
pinched.
Make sure the connectors are plugged in
properly.
20-69