Honda Civic 2002-2003 Service Manual page 1083

SRS
DTe Troubleshooting (cont'd)
11. Check resistance between the No.2 terminal of the
floor wire harness 3P connector and body ground.
There should be an open circuit, or at least 1 M 12.
FLOOR WIRE HARNESS 3P CONNECTOR
Wire side of female terminals
Is the resistance as specified?
YES-Go to step 12.
NO-Short to ground in the floor wire harness;
replace the floor wire harness .•
12. Check resistance between the No.3 terminal of the
floor wire harness 3P connector and body ground.
There should be an open circuit, or at least 1 M 12.
FLOOR WIRE HARNESS 3P CONNECTOR
=
Wire side of female terminals
Is the resistance as specified?
YES-Go to step 13.
NO-Short to ground in the floor wire harness;
replace the floor wire harness .•
23-76
13. Check resistance between the No.7 terminal of
SRS unit connector C (8PI and the No.3 terminal of
the floor wire harness 3P connector.
There should be 0-1
Q.
FLOOR WIRE HARNESS
3P CONNECTOR
SRS UNIT CONNECTOR C 18P)
'--------(Q}------"
Wire side of female terminals
Is the resistance as specified?
YES-Go to step 14.
NO-Open in the floor wire harness; replace the
floor wire harness .•
14. Check resistance between the No.3 terminal of
SRS unit connector C (8PI and the No.2 terminal of
the floor wire harness 3P connector.
There should be 0-1
Q.
FLOOR WIRE HARNESS
3P CONNECTOR
SRS UNIT CONNECTOR C (8PI
,-----(Ql---~
VEL
Wire side of female terminals
Is the resistance as specified?
YES-Replace the SRS unit (see page 23-1221 .•
NO-Open in the floor wire harness; replace the
floor wire harness .•