Power Windows
Master Switch Input Test
NOTE: The power window control unit is built into the power window master switch, and it only controls the driver's
window operations.
1. Remove the window master switch (A) (see page 22-133).
2. Disconnect the 14P connector (8) from the master switch.
B
J
~:-;:::;:-"!,,
_ _ _
A
Wire side of female terminals
BLK
RED/VEL
BLK
GRN/WHT
ORN
3. Inspect the connector and socket terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, go to step 4.
22-126