Honda Civic 2002-2003 Service Manual page 688

Glass
Quarter Glass Replacement (cont'd)
17. Use suction cups (AI to hold the quarter glass over
the opening, align it with the clips (81 and set it
down on the adhesive. Lightly push on the quarter
glass until its edges are fully seated on the
adhesive all the way around. Do not open or close
the doors until the adhesive is dry.
B
B
18. Scrape or wipe the excess adhesive off with a putty
knife or towel. To remove adhesive from a painted
surface or the quarter glass, use a soft shop towel
dampened with alcohol.
19. Let the adhesive dry for at least 1 hour, then spray
water over the quarter glass and check for leaks.
Mark the leaking areas, let the quarter glass dry,
then seal with sealant. Let the vehicle stand for at
least 4 hours after quarter glass installation. If the
vehicle has to be used within the first 4 hours, it
must be driven slowly.
20. Reinstall all remaining removed parts.
NOTE: Advise the customer not to do the following
things for 2 to 3 days:
• Slam the doors with all the windows rolled up .
• Twist the body excessively (such as when going
in and out of driveways at an angle or driving
over rough, uneven roads).
20-34