Honda Civic 2002-2003 Service Manual page 457

•
•
6. Install the reverse lock cam.
7. Select the proper size 72 mm shim (A) according to
the measurements made during the Mainshaft
Thrust Clearance Adjustment (see page 13-43).
Install the oil gutter plate (B), oil guide plate M, and
72 mm shim into the transmission housing (C).
8. Remove the dirt and oil from the tramsmission
housing sealing surface. Apply liquid gasket (PIN
08718-0001) to the sealing surface. Be sure to seal
the entire circumference of the bolt holes to
prevent oil leakage.
NOTE: If 5 minutes have passed after applying
liquid gasket, reapply it and assemble the housings.
Allow it to cure at least 20 minutes after assembly
before filling the transmission with oil.
a ..
"'
o
----0
-----0--
-----6-
6- -
---"0---
_._.- Liquid gasket
(cont'd)
13-47