EPS Components
Steering Gearbox Removal (cont'd)
12. Disconnect the EPS wire harness 6P connector (A),
and remove the EPS wire harness (B) and mounting
bracket (C).
13. Remove the ground cable terminal (A) from the
steering gearbox housing.
17-52
14. Remove the engine wire harness clamps (A) from
the three mounting brackets.
A
15. Remove the heater hose (B) from the bracket.
16. Open the heater valve cable clamp (A), and
disconnect the heater valve cable (B). Remove the
heater valve (C) from the bulkhead, and move it
aside.
c