Coolant Check; Coolant Replacement - Honda Civic 2002-2003 Service Manual

Cooling System
Coolant Check
1. Look at the coolant level in the reserve tank. Make
sure it is between the MAX mark (A) and MIN mark
(B).
2. If the coolant level in the reserve tank is at or below
the MIN mark, add coolant to bring it up to the MAX
mark, and inspect the cooling system for leaks.
10-6
Coolant Replacement
1. Start the engine. Set the heater temperature control
dial to maximum heat, then turn off the ignition
switch. Make sure the engine and radiator are cool
to the touch.
2. Remove the radiator cap.
3. Remove the splash shield (see step 23 on page 5-5).
4. Loosen the drain plug (A), and drain the coolant.
=
o
A
5. Remove the reserve tank drain cap (A), and drain
the coolant.
A