Pdf Direct Print - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

16 Appendix

PDF Direct Print

PDF Direct Print is a feature that prints PDF files by directly using the lpr command instead
of a print driver. When this feature is used, the following items will be printed based on the
settings of [PDF] under [Print Mode].




Note
PDF Direct Print Settings
This section describes the available settings with the PDF Direct Print feature.
The settings configured here are valid when printing PDF files without using
"ContentsBridge" provided by Fuji Xerox.
Note
Setting Item
Output quantity
2 sided printing
Print mode
16
Collate
712
Output Quantity
2 Sided Printing
Print Mode
Collate
• Two types of the PDF Direct Printing methods are available: the genuine Adobe PDF Direct Print and
the non-PostScript PDF Direct Print (PDF Bridge). You can select which method to prioritize in the
System Administration mode.
• When you use the lpr command to print, specify the number of copies to be printed in the lpr
command. The copy quantity setting made on [Output Quantity] under [PDF] becomes invalid. If
the copy quantity is not specified in the lpr command, only one copy is printed.
• Before you print PDF file using the lpr command, the LPD protocol of the machine must be started
with the control panel or CentreWare Internet Services.
• PDF Direct Print supports PDF version 1.6.
• For information on printing PDF files using ContentsBridge Utility, refer to the manual provided on
the Media (Software/Product Manual).
Item
Number
401 Sets the number of copies to be printed.
[1-999] (Default: 1): 1-999 sheets
402 Sets the 2 sided printing option.
[0] (Default) : 1 Sided
[1]
[2]
[2 Sided Print] prints 2 sided in the orientation so that pages can be bound
along the long edge.
[2 Sided Print] prints 2 sided in the orientation so that pages can be bound
along the short edge.
403 Selects which you prioritize: image quality or print speed.
[0] (Default) : Standard
[1]
[2]
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting prioritize the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
404 Selects whether to print multiple-sheet documents as collated sets (1, 2, 3...1,
2, 3...).
[0] (Default) : Off
[1]
 Layout
 Paper Size
 Output Color
Process Mode

Value
: 2 Sided, Flip on Long Edge
: 2 Sided, Flip on Short Edge
: High Speed
: Fine
: On