Paper Jams At The Output Tray; Paper Jams At The Finisher Tray - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

15 Problem Solving
2
Pull out the unit 4.
3
Turn the knob 4a to the left to remove all the
jammed paper from the left side of the unit 4.
Note
4
Return the unit 4 to the original position.
5
Close the finisher right cover.
Note

Paper Jams at the Output Tray

1
Remove jammed paper from the output tray.
Note
2
Open and close the right cover of the finisher.
Note

Paper Jams at the Finisher Tray

1
Remove jammed paper from the finisher tray.
15
Note
2
Open and close the right cover of the finisher.
622
• If paper is torn, check for any torn pieces of
paper inside the machine.
• A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
• If paper is torn, check for any torn pieces of
paper inside the machine.
• A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
• If paper is torn, check for any torn pieces of
paper inside the machine.
• If a stapled document jams, the stapled nails
may be bent. and stuck inside the machine,
which makes it difficult to remove the
jammed paper. Lift the jammed paper
upward and remove it.