Improving The Paper Feeding Performance - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

Improving the Paper Feeding Performance

The paper feeding performance can be improved when the HCF B1-S (Tray 6) is used.
If images are skewed even when paper is loaded correctly, use the following procedure so
that the paper may be fed more accurately.
Important • If you are using special media, set the paper type according to the paper loaded. For more
1
Pull out the tray towards you until it stops.
CAUTION
Make sure to pull out the tray slowly.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body
causing injuries.
Important • While the machine is processing a job, do not
2
Slide the switch on top of the long-side paper
guide to the right until it stops.
Note
3
If the paper feeding performance is not
improved after step 2, slide the switch on the
right front side towards the back of the
machine until it stops.
Important • To return the switch to its original position,
4
Push the tray in gently until it stops.
information, refer to "Paper Tray Attributes" (P.156).
• If any of the following types of paper is loaded in the tray, performing the procedure in this section
may cause the paper to be fed improperly, resulting in paper jams.

Heavyweight
(221 gsm or more)
 Gloss (106 gsm or more)

Labels (106 gsm or more)
pull out the tray.
• To return the switch to its original position,
slide it to the left until it stops.
slide it towards you until it stops.

Improving the Paper Feeding Performance


HW Reload
(221 gsm or more)
 Gloss Reload
(106 gsm or more)

Transparency

Hole Punched Heavyweight
(221 gsm or more)
 Tab Stock (221 gsm or more)

Adhesive
2
67